LV Switchgear, also known as UL 1558 Low Voltage Switchgear, is a key low-voltage power distribution product used for receiving, distributing, controlling, and protecting electrical energy in low-voltage systems. It is commonly installed on the low-voltage side of transformers and serves as the primary distribution equipment for downstream switchboards, panelboards, motor control systems, lighting panels, power equipment, HVAC systems, pumps, and other electrical loads.
| Standard Reference | UL 1558, ANSI C37.20.1 |
|---|---|
| Circuit Breaker Type | UL1066 Air Circuit Breaker, ACB |
| Breaker Installation | Withdrawable type available |
| Anma Akımı | Project-based configuration; high-current busbar options available |
| Short-Circuit / Bus Withstand | Up to 100kA available according to project design |
| Kurulum | Indoor electrical room, power distribution center, substation, industrial facility |
Yalnızca tipik konfigürasyon. Nihai değerler, proje gereksinimlerine göre teyit edilir.
LV Switchgear / UL 1558 Low Voltage Switchgear is widely used in low-voltage power distribution systems that require high reliability, high current capacity, and safe operation. It is typically installed after a transformer and acts as the main low-voltage distribution center for electrical loads.
Applications: NDG3A－250 disconnecting switches are applicable to the AC/DC power system and mainly installed in the low-voltage distribution circuit. The products can be used for infrequent making and breaking as well as to isolate a...
Ayrıntıları görüntüle
1. Applicable Scope and Purpose of Circuit Breaker The NDM2E-800 series of electronic molded case circuit breakers (hereinafter referred to as circuit breakers) apply to infrequent switching of circuits with the AC 50Hz, the working voltage of A...
Ayrıntıları görüntüle
1. Applicable Scope and Purpose of Circuit Breaker The NDM2-800 molded case circuit breaker (hereinafter referred to as circuit breaker) applies to infrequent switching of circuits with the AC 50Hz, the working voltage of AC690V and working curr...
Ayrıntıları görüntüle
1.Application Scope NDB1-40 dedicated to the low voltage power distribution system of industrial, buildings, energy, communications and infrastructure. The MCB can cut off phase and neutral lines at the same time, whereas the neutral line should...
Ayrıntıları görüntüle
Öne Çıkan Kategoriler
Ürün Sorgusu Gönder
24 saat içinde sizinle iletişime geçeceğiz